NOTICE: Product images may vary from the actual item due to differences in size or configuration options.

The Wilkins 2-950XLT2FT is a top access double check valve assembly with Fast Test cocks, designed to protect potable water lines against backsiphonage and backpressure where a potential non-health hazard exists.

Key Specifications:

• Size: 2 Inches
• Maximum Working Water Pressure: 175 PSI
• Maximum Working Water Temperature: 180°F
• Notable Certifications: ASSE 1015, cUPC, CSA B64.5
• End Connections: Threaded ANSI B1.20.1

Other Related Variants:

• 3/4-950XLT2FT: 3/4 Inches model size
• 1-950XLT2FT: 1 Inches model size
• 1 1/4-950XLT2FT: 1 1/4 Inches model size
• 1 1/2-950XLT2FT: 1 1/2 Inches model size

Materials:

• Main Valve Body: Low Lead Cast Bronze ASTM B 584
• Access Covers: Low Lead Cast Bronze ASTM B 584
• Fasteners: Stainless Steel, 300 Series
• Elastomers: Silicone and Buna Nitrile
• Polymers: Noryl™
• Springs: Stainless Steel, 300 Series
• Test Cock Cover: Plastic
• Ball Valve Handles: Stainless Steel

Typical Installation:

Local codes shall govern installation requirements. To be installed in accordance with the manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12 inches and a maximum of 30 inches above adequate drains with sufficient side clearance for testing and maintenance. If installed below grade, be certain adequate drainage is provided to prevent the device from being submerged.

Standards Compliance:

ASSE Listed 1015; cUPC Listed; CSA Certified B64.5; AWWA Compliant C510; Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California (Horizontal installations only); Meets the requirements of NSF/ANSI/CAN 61 and 372 (Less than 0.25% Weighted Average Lead Content)

Features & Benefits:

• Top Access Design: The Zurn 2-950XLT2FT features 45-degree angled checks accessible from the top for easy maintenance without removing the device from the line.
• Fast Test Cocks: Equipped with Fast Test cocks protected by plugs to prevent fouling from insects, dirt, and debris, enabling quick field testing.
• Lead-Free Construction: Meets NSF/ANSI/CAN 372 standards with less than 0.25% weighted average lead content, ideal where lead-free valves are required.
• Full Port Ball Valves: Supplied with full port ball valves and rated to 180°F for maximum flow performance and durability.

FAQ

Q: What type of backflow protection does the Wilkins 2-950XLT2FT provide?

A: The Zurn 2-950XLT2FT provides protection against both backsiphonage and backpressure of polluted water where a potential non-health hazard exists.

Q: Can this assembly be installed in both horizontal and vertical orientations?

A: Yes, the Wilkins 2-950XLT2FT is certified for both horizontal and vertical flow-up installations unless otherwise noted by specific approval agencies.

Q: What is the recommended installation height for this backflow preventer?

A: The assembly should be mounted at a minimum of 12 inches and a maximum of 30 inches above adequate drains with sufficient side clearance for testing and maintenance.

"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us