Material Inspection

• Natural Variation: As a natural stone, Bianco Dolomite may show differences in color, pattern, texture, and veining. Expect these variations from what is pictured.
• Pre-Installation Check: Inspect tiles for damage, including chipped edges or broken pieces, before installation. No services or adjustments will be made after installation begins.

Installation Instructions

1. Dry-Fitting: Lay out the pattern before applying adhesive to plan cuts and visualize the installation. This helps manage variations in the stone.
2. Using Thinset Mortar:
   • Use white thinset mortar to prevent color changes in the tile.
   • For faster installation, use a rapid-curing thinset.
3. Adhesive Application:
   • Apply adhesive that can be covered in 10-15 minutes.
   • Maintain a grout joint of at least 1/16", avoiding a butt set.
   • Use a 3/16" or 1/4" square notch trowel.
   • Smooth out the ridges in the mortar using the flat side of the trowel before placing tiles.

Grouting Instructions

• Use non-sanded grout to prevent scratching the marble.
• Test a small area before full grouting to ensure no scratches.
• Fill grout joints completely, avoiding pits or voids.
• Clean excess grout as you work, not letting it harden fully.
• Never use acid-based cleaners for grout haze removal.
• Use a damp sponge for final cleaning and smoothing grout joints.
• Apply grout release before grouting to ease cleanup and prevent staining.

Sealing

• After grouting, apply a high-quality breathable stone sealer to protect against water absorption, efflorescence, and staining.
• If desired, use a color enhancer to bring out the natural color of the stone.
• Reseal the tiles when needed, particularly if they darken over time.

Cutting

• Use a wet-saw with a continuous rim diamond blade designed for marble.
• Avoid using “turbo” or notched blades, which may cause chipping.

Care and Maintenance

• Clean with a few drops of neutral cleaner, stone soap, or mild dishwashing detergent mixed with warm water.
• Rinse thoroughly after cleaning and dry with a soft cloth to prevent streaks.
• Avoid acidic cleaners (lemon, vinegar, etc.) and abrasive products, as they can damage the marble.