🔥ATOLL D+ Available now🔥

New PLUS version for Nikon Z mount cameras
Three new features bring an unrivaled smooth experience🤗
1. New aluminum alloy knob ➜easier to operate🤟
2. Two new stability supports ➜more stable💪
3. Add two detachable Extended brackets➜Ensure that ATOLL maintains high stability even when it is positioned farther from the camera body.🫶

✱This product includes✱

• Ring Base X1 : Max Lens Diameter 75mm
• Camera Plate X1 : Extended Plate
• Detachable Extended Brackets X2
• 4mm hex wrench X1
• 3mm hex wrench X1
•  Link Screw X4
•  1/4"-20UNC Screw X2
  

✱Features✱

• Change the camera angle in one second.
• 180° free rotation, smooth experience. In some condition, it can even rotate to 360
• 3 click points at 0°, 90° and 180°. It's much intuitive to adjust camera angle.
• Change lens directly without disassemble. (compares to a tripod collar) Extremely safe to change lenses in dark place.
• Keep center of gravity, more balanced.
  

✱Compatibility✱

 Please check📍ATOLL compatible list for your camera, To avoid buying the wrong model.

• Nikon Z series cameras are compatible with Heightening Plate and ATOLL D/D+ 
• Heightening Plate and ATOLL D/D+ is not compatible with Nikon Z9/battery grip/body cage/L bracket
• If you need to install the Grip/body cage/L bracket, please choose ATOLL X
• Because the flash of Nikon DSLR is very protruding, many lenses cannot be mounted, It is recommended to install ATOLL X instead of ATOLL D on Nikon DSLR.
• Canon DSLR series cameras cannot be mounted with EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses after installing ATOLL D/D+
• Canon DSLR recommends installing ATOLL X to install EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses.
  

✱Installation guide✱

Please watch 📍ATOLL installation guide for more installation details.

• Since Nikon Z series cameras are not high enough, if you install ATOLL D/D+ on Z series, it may not be completely aligned with the center of the lens, (However, most Z series lenses can be installed)
• There are two ways to align ATOLL  to the lens center of Nikon Z series cameras

1. Add-ons a Heightening Plate
2. you can try to disassemble the ATOLL, as shown in this video (there is grease inside, please pay attention) https://youtu.be/mktHdhu2xss 

• When installing the ATOLL D/D+ on the Nikon Z8, it may not fully align with the center of the lens, but most Z-mount lenses can be used. You can add a Bridge Plate to align it perfectly.
• When installing the ATOLL D+ on the Nikon Z8 with an Extended Brackets, the Nikon 28-400 lens cannot be mounted
• If you use the ATOLL D+ on a Nikon Z series camera, you will need to remove the Extended Brackets to install the following lenses:
  -NIKKOR Z 35mm f1.2 S
  -NIKKOR Z 35mm f1.2 S
  -NIKKOR Z 135mm f1.8 S Plena
• ATOLL D+ is not compatible with version Z Tamron 35-150 F/2-2.8
  -If you install the Z mount version of the Tamron 35-150mm f/2-2.8 when using the ATOLL D+, it will block the camera grip space and prevent the use of the new Extended Brackets.
  -If you install the Z mount version of Tamron 35-150mm f/2-2.8, it is recommended to choose ATOLL X+
• Installing Heightening Plate & ATOLL C/C+ on the Z series may cover the function keys.
• If you usually use the function keys,we recommend Heightening Plate & ATOLL D/D+,which can make ATOLL farther away from the camera and increase finger space to access function key.

✱Note✱

• It is not recommended to install Peak Design anchors on ATOLL quick-release plates because the cuts on the quick-release plates are sharp and may cut it.