Pro Seal is a latex emulsion that quickly seals punctures in all tubeless tires, whether mountain bike or road. Pro Seal sealant is applied through the valve or poured directly into the partially demounted tire, providing an effective, immediate repair.

• Can be used in both "Tubeless" and "Tubeless ready" tires.
• Seals holes up to 8mm.
• Compatible with CO2 cartridges.
• Contains natural Latex, is non-corrosive and non-toxic.
• Pressure resistant up to 7 bar / 100 PSI.

INSTRUCTIONS FOR USE:

Dismounted tire:

New tire: Clean the inside with Bike7 Degrease and wipe it down. Mount one side of the tire, holding the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Fully mount the tire.

Mounted tire, with the 125 ml bottle:

Remove the valve core and place the wheel, valve side down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the nozzle 2 mm from the end, and pour the required amount directly through the valve while holding the bottle upright. Reassemble the valve.

Inflating the tire:

Carefully rotate the wheel one full revolution. Inflate the tire until it fits properly. Rotate and wiggle the wheel for about 1 minute to distribute the Bike7 Pro Seal evenly. Inflate the tire to the desired pressure.

Road tire (23-30 mm): 60 ml / tire and MTB tire (29", 2.0-2.4): 100 ml / tire.

For larger tires, a larger amount is recommended. For better protection, a larger amount of product can be used.

Effective lifespan between 3 and 8 months, depending on conditions. Check the product's fluidity every month and top up as needed. Article number: 977400924 EAN: 5414195014790 Brand: Bike7 Model: PRO SEAL Bicycle type Triathlon / TTTrekking bikeHoliday bikeRecumbent bikeRacing bikeMountain bikeKids' bikeHybrid bikeGravel bikeFolding bikeFixie Cargo bikeElectric bikeCyclocross bikeCity bikeChopper bikeTransport bikeBMX

Content (ml): 125