Shopping security
The Espar AS3 B2L 12V Heater- Full Kit (Gasoline) is the classic way to heat the interior of your van using fuel from your main diesel tank. This kit includes everything you need to install the Espar in your Sprinter van and will operate effectively up to ~ 13,120 ft. in elevation with the included altitude sensor.
Not all Espar kits are built the same. These units are genuine Eberspacher heaters with high-quality wiring harnesses from Eberspacher.
Package contents:
- Espar AS3 B2L 12V Heater (Gasoline)
- INSTALL KIT - AIRTRONIC S3 B2L 12V
- CONTROL KIT - EASY START PRO CONTROLLER WITH ADAPTOR
- EXHAUST MUFFLER 24MM
- 26-28mm MUFFLER CLAMP (2x)
- FUEL LINE ADAPTER 7.5MM - 3.5MM
- GAS FUEL PICKUP(standpipe)
Mercedes Sprinter vans: This kit comes with a fuel stand pipe(fuel pickup), not the T-Piece kit that is commonly known to be used. The hoses included in this kit are designed to attach to the factory auxiliary port(with clamps) or you can source the Dorman Auxiliary Fuel connector adapter(Part# 800-188) separately if convenient to your install.
Ram ProMaster vans have an Auxiliary Fuel Port under the cab floor entry. The hoses included in this kit are designed to attach to the factory port(with clamps) or you can source the Auxiliary Fuel connector adapter separately if convenient to your install.
Ford Transit vans will require dropping the fuel tank on the vehicle, adding an additional fuel pickup pipe and components. Transit Kit variant coming soon!
Muffler Installation: The included muffler does not display which direction air flows. Espar confirmed it can be mounted in either direction, just be sure to follow installation guidelines for proper undercarriage mounting.
Recommended to add insulation wrap to exterior fuel lines/connections to prevent cracking.
Espar Camper Van Fuel Installation Guide
Espar AS3 B2L/D2L Install Instructions
Espar AS3 B2L/D2L Operating Instructions (English, pg 30)
Espar AS3 B2L/D2L Technical Sheet
Espar AS3 B2L/D2L Troubleshooting Guide
Espar AS3 B2L/D2L Spare Parts List
Espar AS3 B2L/D2L Repair Instructions
Espar Easy Start Pro Controller Guide
Espar Easy Start Pro Controller Guide Additional Info
Espar Easy Start Pro - Additional Product Info
Espar Easy Start Pro Wiring Diagram
|
Heater Dimensions (HxWxD) |
121.92mm (4.8 in.)H x 309.88mm (12.2".)L x 114.808mm (4.52 in.)W |
|
Weight |
5.5 lbs (2.5 kg) |
|
Heat Output |
6824 BTU (2.0 kW) |
|
Operating Voltage |
12VDC |
|
Rated Power Consumption |
11-26W |
|
Fuel Consumption |
0.04 - 0.07 gal/h (0.14 - 0.26 l/h) |
|
Fuel Type |
Gasoline |
|
Altitude Compensation |
13,120ft (4000m) |
|
Start Up Requirement |
Glow plugs require ~30A at startup for the first minute or two. |
Ships within 48 hours · Estimated delivery Jun 25 - Jun 30
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order