Hamilton 100W 2 Way Trailing/Leading Edge Push On/Off Rotary LED Dimmer Module | LEDITB100

Hamilton Litestat has launched a new 2-Way LED dimmer, designed to be compatible with a wider range of mains dimmable lamp and luminaire brands. Hence, silent and flicker-free in operation, the LEDIT-B100 is the perfect retrofit replacement when used with a standard 2-way Rocker Switch - ideal for applications such as larger rooms with two entrances/exits or on stairway lighting.

LEDIT-B100 comes pre-set to Trailing-Edge' as standard but the dimming mode can be manually set for Leading-Edge' control when necessary and allows the minimum setting to be adjusted. If the circuit contains a mixture of both Trailing and Leading-Edge LEDs, the dimming mode can be fine-tuned to deliver smooth operation and maximum performance.

The LEDIT-B100TM intelligent (mains voltage) dimmer can control up to 100 W LED bulbs (10 bulbs Max) in both Trailing and Leading Edge mode.

Please Note: Due to the technical nature of LED dimming, we advise you contact us if you re unsure on your LED dimming requirements. LED dimming can be a headache if purchased incorrectly and there are many factors which can affect the nature of dimming LED.

Always check with the manufacture of the LED lamps or LED fittings you want to dim as this dimmer module may not be suitable.

Features

• Product range: GRID-IT
• Trailing/leading edge push on/off rotary LED dimmer module
• Wattage: 5 - 100 W
• Current rating: 0.4 A
• Voltage: 230 - 240 V
• Mains frequency: 50 Hz
• Ways: 2 Way
• Minimum load: 5 W LED bulb
• Maximum load: 100 W
• Switched poles: Single
• Trailing Edge and Leading Edge dimmer
• Configurable minimum dimming level and dimming mode
• Compatible with incandescent lamps, mains halogen lamps, mains dimmable LED lamps, mains dimmable CFL lamps and dimmable LV electronic transformers
• Manually select dimmer mode (Leading or Trailing Edge)
• Designed to be installed using a 35 mm flush wall box that conforms to BS4662:2006
• One-way and two-way switch for ON/OFF function (retrofit traditional dimmer)
• Built in short circuit protection that, once activated, will suspend operation for 5 seconds
• Soft start up and down feature helps to extend lamp life
• Thermo Circuit protection activates and disconnects the dimmer if the temperature rises above 110 C - after cooling to below 75 C, the dimmer resumes normal operation
• The dimmer will automatically be set to Trailing Edge mode but can manually be set to Leading Edge mode
• Mains directly dimmable LED lamps. (100 W in Trailing Edge (auto-mode) and Leading Edge (manual mode)
• Dims up to a maximum of 10 LED lamps per circuit
• CE marked
• IP rating: IP2XD
• Ambient operating temperature: -5 to +40 C
• Internal Use Only
• Maximum installation altitude: 2,000 m
• Face plate must be earthed