PREPERATION OF WALL-

Preperation is key.... to ensure the surface that you are going to apply on is flat and and smooth with no imperfections.

To help stop the suction on newly plastered wall's, apply 1 coat of fissacrill

PRIMING THE SURFACE

Apply 1 coat of primariflesso which can be diluted with 20% of water and leave to dry for 2 hours, and then give a light sand if needed.

APPLICATION OF RIFLESSO

Next is applying the first coat of Riflesso and leave to dry for 12 hours.

Then apply Second coat of Riflesso and leave to dry for 6 to 12 hours,

Apply your 3rd coat and you can add as many colours wet on wet.

Compress with your Trowel and polish with a 4000 grit,
The next day you can polish again with 4000grit.

In order to preserve your Riflesso from ageing and to increase its beauty you apply the Riflesso wax(cera riflesso) A high quality wax, you apply this Thinly with either a sponge or cotton cloth,

Be careful with light coloured products as it may cause yellow stains if you apply too much.
The last stage is to buff up with a polishing Pad but best results use a car/orbital buffer.