Shopping security
Whether you're routing coolant through a lab bench, connecting a vacuum pump in a workshop, or running a low-pressure gas line in an industrial setting, finding a hose that stays flexible, seals reliably, and holds up to temperature swings is harder than it should be. This white rubber vacuum tube is built for exactly those situations — giving DIYers, technicians, and lab professionals a dependable, cut-to-length solution without the guesswork.
Each length is made from soft, wear-resistant rubber with a smooth bore and uniform wall thickness. Inner diameters range from 2mm (≈5/64") to 25mm (≈1"), with outer diameters up to 34mm (≈1-3/8"), available in 0.9M (≈35"), 1M (≈39"), and 1.8M (≈71") lengths. The white color makes it easy to spot contamination or discoloration during use — a practical advantage in laboratory and food-adjacent environments.
Typical use cases include laboratory vacuum lines and peristaltic pump tubing, water and coolant routing in DIY hydroponics or aquarium systems, and light-duty oil or gas transfer lines in automotive workshops and HVAC applications — all scenarios where a flexible rubber hose pipe with a precise inner diameter makes the difference between a clean install and a frustrating leak.
| Material | Rubber (soft, wear-resistant compound) |
|---|---|
| Color | White |
| Type | Rubber Vacuum Tube / Laboratory Hose Pipe |
| Inner Diameter (ID) | 2mm–25mm (≈5/64"–1") — see variant options |
| Outer Diameter (OD) | 4mm–34mm (≈5/32"–1-3/8") — see variant options |
| Available Lengths | 0.9M (≈35"), 1M (≈39"), 1.8M (≈71") |
| Temperature Range | -51°C to 135°C (-60°F to 275°F) |
| Working Pressure | See variant options / Contact us to confirm |
| Fluid Compatibility | Water, air, vacuum, light oil, non-aggressive gases |
| Fitting Compatibility | Standard metric & imperial barb fittings |
| Country of Origin | China |
| Condition | New |
Measure the outer diameter of the fitting or barb you need to connect. The tube's inner diameter (ID) should match or be very slightly smaller than the fitting OD for a snug, leak-resistant seal. For example, a 6mm barb fitting typically pairs well with a 6mm ID tube. When in doubt, size down rather than up.
Working pressure varies by wall thickness and tube diameter. Smaller-diameter tubes with thicker walls generally handle higher pressures. This tubing is designed primarily for low-to-medium pressure vacuum, water, and gas lines. For high-pressure hydraulic systems, please contact us to confirm suitability.
This rubber tubing is generally moisture-resistant and can handle occasional outdoor exposure. However, for prolonged UV or ozone exposure, a silicone or EPDM alternative may be more suitable. For indoor lab, workshop, or sheltered outdoor use, this tube performs well.
This rubber vacuum tube is rated from -51°C (-60°F) to 135°C (275°F), making it suitable for most laboratory, HVAC, and light industrial applications involving hot water, steam lines, or cold environments.
Yes. The flexible rubber construction allows it to stretch slightly over standard barb fittings. It is compatible with most metric and imperial barb connectors. Standard worm-drive hose clamps can be used to secure the connection on larger diameters.
Yes. The tubing can be cut cleanly with a sharp utility knife or tube cutter. Select the length option (0.9M, 1M, or 1.8M) that best suits your project, then trim to your exact requirement on-site.
This tubing is generally compatible with water, air, vacuum lines, light oils, and non-aggressive gases. It is not recommended for use with strong solvents, concentrated acids, or fuels without first confirming chemical compatibility. Contact us if you need guidance for a specific fluid.
Ships within 48 hours · Estimated delivery Jul 1 - Jul 6
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order