Complete stereo upgrade fitting kit to install a Single or Double DIN head unit and retain the original steering wheel controls in Audi A3 8P facelift (2006-2013) cars with fully amplified sound systems.

This head unit fitting kit includes:

Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Audi Quadlock Steering wheel control interface with amplifier turn on (49-AUD-03)

Car audio and steering wheel control interface for Audi cars that have quadlock connectors behind the radio and have fully amplified BOSE audio systems.This CANbus steering wheel control interface will allow you to retain the use of the steering wheel audio controls.

Gives volume, seek, source, and telephone commands to an after market radio.

The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the car.

The CANbus interface will generate an ignition power supply to the new radio, via the red wire. it will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black)

PLEASE NOTE: This interface provides a CAN signal to switch on the amplifier

Universal patch lead for steering control interface (49-025)

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Audi A3 (2003-2013) Single/Double DIN car audio fascia adapter with removable pocket (50-271)

Replacement car audio fascia to enable you to change the original radio in the car to a Single and Double DIN aftermarket version

Fits Audi A3 (8P) (2003 - 2007) and A3 (8P) facelift/ 8PL (2006 - 2013) car models (For OEM Radios With Rounded Corners)

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

PLEASE NOTE: For a double din installation please use 50-702

The fascia will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit