White Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.

White Resin V4.1 produces brighter white parts compared to White Resin V4.0.

• Supports print resolutions: 100 and 50 microns

• Ultimate Tensile Strength: 53 MPa

• Tensile Modulus: 2.367 GPa

• Elongation at Break: 8 %

   

Compatible with

• Formlabs Form 3/+
• Formlabs Form 3L
• Formlabs Form 3B/+
• Formlabs Form 3BL
  

Please Note: V4.1 Resin is NOT compatible with the Form 2 printer.

This resin is a newer formulation designed for the Form 3 series printers and is not compatible with the Form 2 printer.

V4 and V4.1 Resins Cannot Be Mixed

V4.1 resin has a different chemical composition than V4 resin. Do not mix these two formulations in the same tank, as it will compromise print quality and can lead to print failures.

To switch from V4 to V4.1 resin, you must first empty, clean, and reprogram your current resin tank. Alternatively, you can use a new resin tank to avoid the cleaning process.